Sankyo America (The Global Standard in CAM Indexing)

Sankyo America (The Global Standard in CAM Indexing)

Home - Accessories - Overview
Home
About Us
Rep Locator
Cam Indexers
Flexible Servo Index
Part Handlers
Accessories
Torque Limiters --
Output Risers --
Timing Cam Packages --
Motor Drive Controllers --
Gear Motors --
Reducers --
Assembly Chassis
Machine Tools
Coil Feeds for Presses
Technical Resources
Site Map
eNEWS
Downloads
Contact Us


Sign Up & Be Informed!

Accessories - Sankyo America (The Global Standard in CAM Indexing)


Overview

We offer many types of easy-adjust torque limiters for use with Sankyo’s equipment or retrofitted to your rotary or linear application. Risers are designed to maintain the index hollow bore feature and be used with our flange type torque limiting clutches. Timing cam or cycle cams packages can send a signal the controller to stop the motor when running a cycle on demand application. The signal can also interlock supporting machinery to avoid tooling crashes or optimize machine cycle time by overlapping motions.

Drive options are based on being compliant with your requirements, voltage options and cycle frequency rates. Sankyo offers a large variety of drive components including explosion-proof, washdown or clean room compatible units are available. All accessories are intended to protect your investment, add value to your product and supply years of reliable service.

Torque Limiters - Accessories - Sankyo America (The Global Standard in CAM Indexing)

Torque Limiters
Rotary and linear torque limiting clutches feature accurate automatic or manual reset positions, easy-adjust torque ranges, overload monitoring, washdown and clean room compatible models. Multiple mounting configurations include shaft to shaft coupling with misalignment characteristics same as flexible couplers for low or high rotational speeds. Shaft to flange types are commonly used to mount hub-less sprockets or dial plate fixtures. Flange to flange types are low profile designed with hollow bores for small or large rotating fixtures. Linear torque limiters protect in one axis motion with mounting in any angle. A perfect choice to provide protection during the event of a tooling crash.

Output Risers - Accessories - Sankyo America (The Global Standard in CAM Indexing)

Output Risers
Stationary mounting for a second dial plate or measurement equipment can mounted at various heights above the indexing dial with our output risers. While maintaining centering pilots on both ends of the riser, mounting to our standard flange is quick and easy. The hollow bore is maintained through the index and riser for routing supply lines or shafting. All risers are compatible with use of hollow bore type torque liming clutches and offer overload sensor mounting. Custom configurations or materials can be designed to meet your needs.

Torque Limiting - Automation Equipment - Sankyo America

Timing Cam or Cycle Cam Packages
Most indexing or pick & place full cycle motions are done with one input shaft revolution. Sankyo offers photo beam sensors, proximity, mechanical limit switches or encoders to provide efficient controller feedback when the cycle has finished. Each can be mounted in multiples for redundant safety requirements or customized for special environments. Timing packages can increase machine speeds by overlapping motions, match velocity of supporting equipment or interlocking controllers to avoid tooling crashes. High speed monitoring; closed loop intrinsically safe systems can keep your operators safe.

Torque Limiting - Automation Equipment - Sankyo America

Motor Drive Controllers
VFD (variable frequency drive) controllers and AC brushless motors are Sankyo’s standard drive options. This combination will supply many years of maintenance free service and no carbon dust contamination typical of clutch or brake motor types. Each controller features CE/UL approval, motor overload protection, electronic braking, frequent stop/start cycling, variable speed ramps, speed change on the fly, multiple preset speeds for setup and emergency stop recovery. Clutch and brake packages or servo motor drives are available for extreme cycle rates or closed loop monitoring. Emergency stop category-0 compliancy is accomplished with brake motors to protect human interface.

Torque Limiting - Automation Equipment - Sankyo America

Gear Motors
Hollow bore right angle gearmotors are an economical solution featuring versatile mounting in 90° increments. Most units fit within the height of the indexing or handler unit and offered with 230 or 460 dual voltages. Single or three phase incoming power is compatible with these three phase motors when controlled with a VFD (variable frequency drive). Optional brake motors can mechanically stop all motion if an emergency stop occurs or usage without VFD controllers. Washdown versions are available.

Torque Limiting - Automation Equipment - Sankyo America

Reducers
Sankyo's R series low backlash worm reducer includes an optional electric clutch and/or brake. Belt driven sprockets can be mounted to the clutch or the input shaft. Optional servo, NEMA or IEC motor frame adapters are available for special washdown, explosion-proof or air motor applications. Conventional right angle reducers with hollow bore, 56C and IEC frames can also incorporate clutch/brake modules and special motors. We offer drive solutions for applications from 6 to 7500 watts (0.008 to 100 hp).

Accessories - Sankyo America (The Global Standard in CAM Indexing)

Overview
Torque Limiters
Output Risers
Timing Cam Packages
Motor Drive Controllers
Gear Motors
Reducers
Contact Us
 

Advertisement

© Copyright Sankyo America, Inc. All Rights Reserved.
Submit Comments to Webmaster