Sankyo America (The Global Standard in CAM Indexing)

Sankyo America (The Global Standard in CAM Indexing)

Home - Assembly Chassis - Overview
Home
About Us
Rep Locator
Cam Indexers
Flexible Servo Index
Part Handlers
Accessories
Assembly Chassis
Precision Link Conveyor ----
Rotary Base Assembly ----
 
Machine Tools
Coil Feeds for Presses
Technical Resources
Site Map
eNEWS
Downloads
Contact Us


Sign Up & Be Informed!

ASSEMBLY CHASIS - ROTARY BASE


Overview

Sankyo custom assembly machines combine linear feeding or indexing motions with pick & place part linear handler options. Motions can be synchronized with a common drive to avoid tooling crashes. Designed with positional accuracy at high speeds, minimal floor space is required.

Each IC80 series linear assembly precision link conveyor is offered with 3 chain link size options and 19 standard frame lengths. Accurate feed pitch positioning is achieved in forward or reverse directions. Optional synchronous or asynchronous pick & place or rotary handlers are designed to your application.

The BH series rotary assembly chassis is the apex of assembly with up to 12 pressing and/or linear pick & place handlers mounted above an indexing dial plate. Featuring; 3 housing sizes with 6 to 36 indexing dial stations accurately positioned.

Additional peripheral supporting machinery can be synchronized to either assembly machine by attaching to the PTO/line shaft provided under the mounting surfaces. Both can be driven with globoidal cam indexing units or servo motors. High precision needle bearings, cam followers & quality components maximize your production with reliability for decades of service.

Precision Link Conveyor (IC Series) - Assembly Chassis - Sankyo America (The Global Standard in CAM Indexing)
IC80 Precision Link Conveyor (click here for more)
  • 0~120 Cycles per Minute, On Demand or Continuous
  • ±0.1mm (±.004") Feed Position Accuracy
  • 80 (3.14"), 120 (4.72") or 160mm (6.29") Link Sizes
  • Ni Plated Steel or Aluminum Anodized Links
  • 120 & 160mm Links are Supported with (4) Cam Followers & (8) Preloaded Bearings on Each Corner
  • 80mm Links are Supported with (2) Cam Followers & (8) Preloaded Bearings on Each Corner
  • Multiple Link Feed Pitches in Forward or Reverse
  • 480 to 12000mm Rail Lengths in 480mm Increments
  • Chordal Chain Tensioner, No Stretch or Maintenance
  • Open Frame Architecture for Back of Part Access
  • All Frame Surfaces are Ni Plated Steel
  • Standard Chrome Hardware w/ Opional for S.S.
  • Optional Line Shaft to Sync Supporting Equipment
  • Optional Sync or Async Linear or Rotary Handlers
  • Optional Overload Torque Limiting Clutch
  • Optional Tooling Plates, Bases, Legs, Line Shafts
  • 25 Standard Conveyor Lengths
  • Carousel or Over-under Units use Small Footprints
  • Special Configurations are Available
Rotary Base (BH Series) - Assembly Chassis - Sankyo America (The Global Standard in CAM Indexing)
BH Rotary Assembly Base (click here for more)
  • 0~90 Cycles per Minute, On Demand or Continuous
  • 6,8,10,12,16,20,24,30 or 36 Indexing Stations
  • ±30 arcsec (±0.0026" at 18" radius) Index Accuracy
  • Dial & Handlers are Sync with 1 Motor, No Crashes
  • Std. Clutch/Stop Sensor to Protect Human/Tooling
  • Standard Clutch/Stop Sensor on Drive Motor
  • 6GW Pick-Place, 6GX Press/Crimp Handlers
  • 0~12 of Any 6GW/6GX Quantity on Any Spacing
  • 6GW: 0~50mm (0~1.96") Vertical/Lift Motion
  • 6GW: 0~60mm (0~2.36") Horizontal Motion
  • 6GW: 24.5 N (5.5 lb.) Full Stroke Capacity, 45/CPM
  • 6GW: 21.6 N (4.8 lb.) Full Stroke Capacity, 90/CPM
  • 6GX: 0~40mm (0~1.57") Vertical Only Motion
  • 6GX: 250 kgf (550 lbf) Press/Crimp Force
  • ±0.02mm (.0007") All Handler Position Accuracy
  • Painted Frame Base with Reset/Jog Crank
  • Optional SS Hardware, FDA Lubricants, Epoxy Paint
  • Optional Line Shaft to Sync Supporting Equipment
  • Optional Index Dial Overload Torque Limiting Clutch
  • Optional Tooling Plates, Bases, Legs, Line Shafts
  • 3 Standard Sizes with Small Footprints
  • Special Configurations are Available

Assembly Chassis - Sankyo America (The Global Standard in CAM Indexing)

Overview
Precision Link Conveyor
Rotary Base Assembly
Contact Us
 

Advertisement

© Copyright Sankyo America, Inc. All Rights Reserved.
Submit Comments to Webmaster